Changelog

What is new in CutlassEdge.

What changed in each release, in plain terms. Newest first.

v0.2.6 September 2026
  • The chart is now two views: Multi and Composite. The single-session view has been retired, and everything you used it for lives on these two. Your reads, saved lines, replay, and VWAP are all still here. If you were on the single view, it opens on the multi-day view now.
  • Every saved line shows on both views. The Single, Multi, and Both switch on the Levels tab is gone; each line you draw shows on both charts.
  • Replay runs on the multi-day chart. Press R on any day and it rebuilds bar by bar the way the live morning did, with Smooth or whole-period stepping.
  • Each profile set sets its own value area basis, TPO or Volume, right on the set. It used to live only on the single view.
  • Weekly, monthly, and yearly profile sets. When you add or edit a set, pick Profile per: Day, Week, Month, or Year, and the set draws one volume profile per span beside its last day. A new Full day session preset covers a round-the-clock version.
  • This week, month, or year in one click. The Composite view has Week, Month, and Year buttons on its date range, and each stays current as the week or month rolls forward.
  • Auto center keeps the current price vertically centered on the multi-day chart, with as much room above and below as you set. Turn it on in Chart.
  • Cumulative volume profiles can run a date range now, a start and end date, instead of only a day count.
  • Hide a set's collapsed TPO letters. A Show TPO letters switch in the set's Style lets a set be a clean volume profile or footprint.
  • Add a note on the chart by typing. Click a Text, Note, Price note, or Comment and start typing, no need to fill it from the rail first.
  • Hover a weak or poor line and a small card names the reference it reversed at.
  • The cessation mark has its own section in Tools then References now, with its own on/off and colors.
  • Style your IB extension zones: up and down colors, fill opacity, and line thickness.
  • The window compresses to half a screen now, so it fits beside another app without clipping.
v0.2.5 September 2026
  • Watch more than one market at once on Databento. Open a second window on NQ while ES keeps running and both update live, and the watchboard rows fill live on Databento too.
  • Opening a new window is guided. When Databento is live and you open a new window it asks which symbol you want, and if it has no history for that symbol it offers 3 days, 60 days, a custom count, or just today, with the data cost shown before anything downloads.
  • More markets roll to the right contract on Databento. Crude, natural gas, gold, silver, copper, the treasuries, and the FX majors, along with their micros, now follow the front month correctly, and monthly roots are back on the symbol picker.
  • Each market remembers its own layout. Switch from ES to GC and back and your profile sets, styling, and session windows for that symbol come back the way you left them. Turn it off in Settings, Chart.
  • Light and grey chart modes work end to end. The whole chart desaturates now, the per-column volume bars included, where before switching to Light or Grey could fail. The current price line stays a deliberate accent.
  • Your feed tells you when it is delayed. If IB is sending delayed data because there is no real-time CME subscription, the feed reads "Delayed ~15m" in amber and a one-time note explains how to switch to real-time. Before, a delayed feed could read as live.
  • The multi-day read stays on the live session. Clicking a day column no longer moves the Crow's Nest read onto that past day; on the multi-day view the read is always the live session. Replay and the single chart still open the day you pick.
v0.2.4 September 2026
  • Read it from across the room. Bigger reference labels, and the price axis gets its own Size (1x to 4x) and Color, plus a Normal or Dense label spacing switch, all in Style.
  • Pick any ticker on the feed you are connected to. Choose NQ, RTY, or any root from the symbol pill or the watchboard: on Databento it switches that feed to the new symbol, on IB it connects IB. No more "Disconnect Databento first" when you only wanted a different ticker.
  • VWAP from the real trades. Where your Databento fill covers a session, VWAP is built from the actual trades instead of the bars, so it reads truer (it will sit slightly off the old bar-only value). A one-day composite reads that day's VWAP, and letter size no longer shifts a composite's VWAP.
  • Duplicate a profile set. One click copies a set with all its styling, so you can change one thing without rebuilding.
  • Expand only the last N days per set. Keep the recent days expanded and the older ones collapsed, so recent structure stays readable over a long history.
  • Backfill repairs the gaps inside your history, not just the ends, with holidays left alone.
  • The Compass lives in the Crow's Nest now, at the top of the Read tab with its Long and Short pills and the factors behind them, which frees the top bar. The command palette's Compass entry takes you straight there.
  • Reference-touched alerts clear themselves after a few seconds instead of piling up. The X still dismisses one early, the journal keeps every fire, and your armed price alerts still stay until you dismiss them.
  • A session high or low within one letter of yesterday's (or the overnight's) high or low is now marked Weak (day parallel) instead of a clean session extreme. One letter is less than the two it takes to repair. Poor still wins when it applies.
v0.2.3 September 2026
  • Volume delta on the profile. With Databento tick data, any volume profile can show total volume, delta (buyers minus sellers, in your colors), or bid and ask side by side. Run more than one volume profile per set, split by session, hour, or 30, 15, and 5 minutes, and a CVD strip under the chart in the Tools rail rides the same numbers.
  • Footprint. Per-bar bid and ask volume with imbalance marks, the dominant side highlighted, bar footers, and the bar POC, in its own Footprint section of the rail. Needs Databento tick data.
  • Prior levels. The prior day's, week's, and month's high, low, close, POC, and value area as standing lines on both charts, in Tools then References. Pick which ones, their colors and width, and whether a level stays, dims, or drops once price trades through it. Each set can show its own prior session, and they can fire alerts.
  • Clicked levels go where you say. A switch at the top of the Levels tab sends a clicked level to the single chart, the multi-day chart, or both, and clicking no longer pulls you off the multi-day view.
  • VWAP bands draw on every session, on IB and Databento alike, and the IB extension zones stay on the session you are watching through the opening brackets.
  • Simpler colors in Style. The Theme, Set, and Custom modes are gone: the color you pick is the color that draws, and the schemes are named for what they do (One color, Value area, Volume tiers).
  • The app knows when the market is closed. Weekends, the daily break, and CME holidays (including half sessions like Labor Day) show a plain gold notice with the reopen time in ET instead of "reconnecting". The feed light reads the market the moment you connect, not 90 seconds later.
  • Type symbols the way your other platform spells them: /ES, ES1!, ES 09-26, ESU26 all connect to the front month. On roll day a continuous "ES" moves to the new front month on its own and tells you. A stock ticker gets a plain "futures only" message. Monthly contracts like crude or gold: type the dated code, for example CLX6.
  • The Databento fill is careful with your money: a quote is dropped the moment you change the symbol or day count, the Start button says exactly what it will buy, and a double-click cannot start the same fill twice.
  • Alerts have their own sound: pick a tone and test it at the top of Tools then Alerts. Alert toasts stay on screen until you dismiss them. Windows shows Ctrl+K instead of Cmd+K, the feedback form no longer requires an email, and you can replay the first-run tour from Settings.
v0.2.2 August 2026
  • Session windows can run past 4:00 PM now.
  • The chart reads better at any zoom. Text grows and shrinks with the zoom, date labels can sit on the top, the bottom, or both, and hovering any TPO shows its time, date, letter count, and volume.
  • Size the open and close markers on their own sliders, and the single chart's colors now match the multi-day view.
v0.2.1 August 2026
  • Every futures contract now builds its profile at its own tick size and price precision.
  • A connection Doctor for IB Gateway. When it will not connect, one click runs a staged check, heals the common client-id conflict on its own, and hands you a copyable report for anything it cannot fix.
  • The Read tab labels both points of control. It shows the TPO point of control and the volume point of control separately instead of one POC, so the number always matches the line you see on the chart.
  • Set the color of each auto-reference on its own, line and label: naked VPOC, weak and poor highs and lows, session extremes, single prints, low-volume nodes, and gaps.
  • Cumulative profiles now draw on the composite view.
v0.2.0 July 2026
  • Captain's Workspace
  • Volume POC
  • Gap Reference
  • Naked POC
  • The VWAP
  • Replay
v0.1.0 June 2026
  • Price alerts
  • Right-click menu on the chart
  • Send feedback
  • Magnet map
  • Morning Brief
  • Reference alerts
  • Crash reports
  • IB extension zones
  • Share your levels: Export levels in Tools
  • The watchlist board
Ship log

Follow the build.

Every release and its notes ship here. Need a hand with the app? Support is one email away.

Contact support